Maintenance of Engraving Machine

- Nov 05, 2019-

Maintenance of Engraving Machine

1.Operators should often form a good habit of maintaining the equipment they use.

2.Daily maintenance: clean up the working site every day, keep the equipment clean and tidy, ensure the cleanliness of the spindle motor, worktop and control cabinet, and pay attention to whether the circulation of spindle cooling water is smooth, whether the power supply of the water pump is connected, whether there is little cooling water, no water or high water temperature, which can cause damage to the spindle motor. The chuck of the spindle motor should also be cleaned and the nuts fastened every day.

3.Regular maintenance: clean the bearings, guide rails, gears and precision racks of the main shaft, X,Y,Z y and z axis drives, and add lubricating oil (butter). if the lubricating oil can be evenly distributed on the drive components, the service life of the equipment can be prolonged. Check whether the connection cable is connected normally, whether the connection of proximity switch is loose and whether the connection is firm. Check whether the fixing screws of X,Y,Z Y and Z stepping motors and motor shafts are loose. Check the working conditions of CPU fan and power supply fan in the control computer, check whether there is virus, and check whether the contact with USB is firm.