What should I pay attention to when using the mechanical spindle

- Jan 09, 2020-

  I don't know how much you know about the spindle, but nowadays the spindle is used more and more in our life and is a very critical component, so it is very important to people in use. In order to ensure the normal use of the mechanical spindle, it is very important to operate it correctly. Secondly, it is necessary to carry out reasonable maintenance on the mechanical spindle. These are all important factors to ensure the normal operation of the mechanical spindle. Therefore, we should know more about the mechanical spindle. Now let's take a look at the matters needing attention in the use of the mechanical spindle.

  1.the spindle operation, should always pay attention to its dynamic, found abnormal situation, to take measures to resume normal operation.

  2. spindle, bearing is strictly prohibited be affected with damp be affected with damp, especially not flooding.

  3. The rotation direction is counterclockwise. When the reverse direction is found, it is only necessary to switch the two thread ends in the output three heel lines.

  4. Monitor the voltage, current, temperature rise, sound, etc. of the main shaft in use to make it operate within the normal range.

  5. the main shaft shall not overspeed for a long time, but can slow down.

  6. keep the cooling water flowing, the water temperature should not exceed room temperature, the flow rate is about 3-5L/Min.

  7. the main shaft cannot continue to operate, should find relevant professionals, do not dismantle. Through the understanding of the article, everyone has a more comprehensive understanding of the use of mechanical spindle.

  After understanding, we should pay attention to these problems when using them, and pay attention to them, because these points are very important to the use of mechanical spindle. Proper use and maintenance not only ensure the normal operation of the mechanical spindle, but also reduce the damage of the mechanical spindle, thus prolonging the service life of the mechanical spindle.