Product description
CNC drilling machine-3040Y
This model of the CNC router is designed for wide application like wood engraving, advertising plate carving, Aluminum/copper milling/drilling, statue/sculpture caving, plaster carving, Jade/stone carving, etc.
Specification
Working range:300mm*400mm*95mm
Max high:95mm
Tool table size:400*540mm
Mchine outside Measurement:800mm*470mm*500mm
Stepping motors:57*78mm,3A,1.8N.M
Driving Components:TBI SFU 1605 Ball screw Pair
Slide Rails:Round linear slide rail
Motor spindle:800w/1500w/ER11 with Max 7mm tool;2200w/ER20 with Max 12mm tool
Motot spindle rotation speed:24000rpm
Tool Change:Manual
Posotioning Carving:0.03/0.05mm
Max Moving Speed:4000mm/min
Milling Moving Speed:3000mm/min
Input voltage:AC220V or 110V
Control System/Carving Orders:Mach 3 or Weihong or DSP Handwheel
Compatible Software:Artcam, type 3, Beijing Jingdiao, MasterCam, Powermill
Materials to be machined:PVC, PCB, Alumimium, Copper, ABS, Woods, etc
Net Weight/Total Weight:35Kg
Details image
![]() | ![]() |
Applications
Engraving machine is a long-term operation tool, rarely stop, and high-intensity use, for engraving machine is a hazard, so engraving machine needs to be maintained.
In order to maintain our CNC drilling machine-3040Y, please pay attention to the following itemsengraving machine, it is necessary to understand the types of faults that are easy to occur in the engraving machine, so as to maintain the engraving machine
1. Engraving machine over travel alarm. At this time, it means that the operation of the engraving machine has reached the limit position and can no longer continue to run. In the face of this fault, what we have to do is to check whether the design to be engraved is beyond the maximum range of the engraving machine, whether the screws of relevant accessories are loose, or whether the value in the coordinates is beyond the specified maximum value. In case of over travel, only a manual mediation is needed to make the engraving machine run smoothly.
2. There is no alarm fault. The first step is to check the cause of the engraving machine's failure, because we do not know the specific location of the failure, we need to start from whether the installation of each part of the engraving machine is appropriate, and whether the small parts such as screws are stable, and then step by step to find out the cause of the specific failure. If the hardware fault is eliminated, the machine can be manually restored to the mechanical origin.
3. Carving failure. In the process of carving, if there is a fault, it is necessary to check whether it is caused by the loose screw, and check whether it is the error of its own operation path that causes the fault. Check whether the file is too large to cause a fault. By finding out the cause of the fault, you can quickly restore the normal operation of the machine.
After handling the fault, for the carving machine, the most important is a daily maintenance. After working for more than 10 hours every day, the engraving machine needs to conduct a cooling treatment, and timely check whether the temperature of the cooling water reaches the standard. At the same time, maintain the amount of cooling water.
For more details,please Contact us below
Foshan Nanhai Xingtuo machinery CO.LTD
NO.1/2 LianHe Rood ,Luo Cun town, Nanhai District, Foshan City, guangDong,china
Tel: +86 20 87791732
Email:sales3@eejaxt.com sales5@eejaxt.com
CNC-3040Y-800W/1500W/2200W Mini CNC Router | ||
XYZ Axis working range | X300*Y400*Z95mm | |
Max Machined Part Height | 95mm | |
Machine tool Table Size | 400*540mm | |
Machine Outside Measurement | 800*470*500mm | |
Stepping Motors | X Axis | 57*78mm, 3A, 1.8NM |
Y Axis | 57*78mm, 3A, 1.8NM | |
Z Axis | 57*56mm, 2A, 1.8NM | |
Driving Components | X Axis | 1605 Ball Screw Pair |
Y Axis | 1605 Ball Screw Pair | |
Z Axis | 1605 Ball Screw Pair | |
Slide Rails | X Axis | Round Linear Slide Rail |
Y Axis | Round Linear Slide Rail | |
Z Axis | Round Linear Slide Rail | |
Motor Spindle | 800W/1500w/ER11 with Max 7mm tool 2200W/ER20 with Max 12mm tool | |
Motor Spindle Rotation Speed | 24000rpm | |
Tool Change | Manual | |
Positioning/Carving Positioning Accuracy | 0.03/0.05mm | |
Max Moving Speed | 4000mm/min | |
Milling Moving Speed | 3000mm/min | |
Input Voltage | AC220V or 110V | |
Control System/Carving Orders | Mach 3 or Weihong or DSP Handwheel | |
Compatible Software | Artcam, type 3, Beijing Jingdiao, MasterCam, Powermill | |
Materials to be machined | PVC, PCB, Alumimium, Copper, ABS, Woods, etc | |
Warranty | 1 year | |
Net Weight/Total Weight | 35Kg | |
Packing Size | 950*600*700mm | |
Packing List | 1. One whole set router, 2. One Electrical control box, 3. 4 piece holding plates, 4. 4 piece carving tool, 5. 1 power cable and 1 data connection line, 6. 1 driving soft USB, 7. 1 cooling pump for milling tool. |