Product description
62T11-ER11 60000rpm ATC Spindle Motor,is more popular than ISO10. T11 and ISO has very little difference with T11 is made a little smaller for better fitting with 62 spindle.Around 1 to 2 degree difference,T11 is a little small so it runs stablier a little.
The performance characteristics of this 1.5KW 1.8KW 60000rpm spindle:
1.
High precision: the static rotary accuracy of the spindle shaft end is
less than 0.002mm, and the dynamic rotary accuracy is less than 0.006mm
(factory standard), with unmatched high precision characteristics, which
can realize the forming processing with higher precision.
2. High
power and high torque output: combined with the performance
characteristics of the driver, it adopts the motor built-in design and
built-in three-phase variable frequency asynchronous efficient motor,
which can improve the output power and torque within the speed range of
processing demand and greatly improve the processing capacity.
3,
high configuration: with automatic tool change function, the number of
knife change up to 5 million times, with motor temperature sensor,
spindle speed sensor (optional), the use of international famous brand
ball bearing SKF.
4.High speed for 60000rpm,can meet fine processing.
5,
high energy saving: the spindle seal performance is reliable, dust gas
sealing gas consumption is optimized to the minimum, reduce the end
customer use cost.
6. Low failure rate: the finished product is
mature and stable, and the stability of the spindle is significantly
better than that of the peer products.
Technical data sheet
Item | model Technical data | 62T11-ER11-1.8kw |
01 | Max. speed（rpm） | 60000 |
02 | Max.current（A） | 6.5 |
03 | Max.frequency（Hz） | 1000 |
04 | Max.torque（V） | 200 |
05 | Power（KW) | 1.8 |
06 | Cone Run-out(μm) | 1（max） |
07 | Cylinder working pressure（kg f/cm2） | 5.6-6.0 |
08 | Tool change type | ATC |
09 | Standard tool holder | T11-ER11 |
10 | Release、Broach、Broach signal | PNP |
11 | Static run-out at testing bar end(μm) | ≤1.0 |
12 | Dynamic run-out at testing bar end(μm) | ≤8.0 |
13 | Vibration（mm/s） | ≤8.0(50mm) |
14 | Mounting diameter（mm） | Φ61.902～61.91 |
15 | Coolant flow volume（L/min） | water：≥1.6 oil：≥3.0 |
16 | Coolant pressure（kg f/cm2） | water：≥2.5；oil：≥4.0 |
17 | Motor winding resistance（MΩ） | ≥500（H级） |
18 | Withstand voltage（V/M） | 1500V/1in 1 minute |
19 | Noise（dBA） | ≤70 |
20 | Sealing air pressure（kg f/cm2） | 2.5～3.0 |
21 | Sealing air volume（L/min） | ≥40 |
Company profile
Welcome to contact us!
Caroline,Ding
Email:sales3@eejaxt.com
Whatsapp/Wechat:0086 18038825870
