Product description
For more choice to customers, this manual tool change (MTC) spindle is specifically made. It has all the performance and characteristics of 62 Series manual tool change spindle motor but with lower price. The weight is only 3kg because of the MTC.
Advantages:
1.Common size 62mm manual tool change spindle motor
2. Manual tool change and standard ER11 collet with lower price;
3. Well and widely used in PCB Processing;
4. ESD protection function applied in electronic industry;
5. High quiet design to keep customers away from industrial noise;
6. Light weight, small size, more portable;
7. Up to 60000rpm, allowing more options for cutting efficiency;
8. Temperature sensor is built in normally except that a customer doesn’t need it for low cost.
Structure
Motor property curves
Parameter
NO | Data | Model-60D2 |
1 | Motor power(kw) | 1.8/1.5/1.2 |
2 | Rate voltage(V) | 200(3~） |
3 | Max speed(RPM) | 60000 |
4 | Max frequency(HZ) | 1000 |
5 | Torque(N.M) | 0.28/0.24/0.19 |
6 | Max current(A) | 6.5/5.0/4.3 |
7 | Tooling change method | HTC |
8 | Tool conncection | ER11 collet |
9 | Vibration value(mm/s) | ≤0.8 |
10 | Cooling | Water coolant |
11 | Weight(Kg) | 3.0 |
12 | Tooling pulling force(n) | No |
13 | Encoder | No |
14 | Approach switch | No |
15 | Balance level | G1 |
16 | Tooling releasing air pressure(Kgf/cm2) | No |
17 | Air cutain presssure at front end(Kgf/cm²) | ≈2.0 |
18 | Tooling back air pressure | No |
19 | coolant pressure(Kgf/cm²) | ≥2.5 |
20 | Bearing lubrication method | Grease |
21 | Install method | Clamp |
22 | Cone at the end of the shaft pulsates(mm) | ≤0.001 |
More details
Applications
Our certifications
For more details,please contact us below
Foshan Nanhai Xingtuo Precise Machinery Co,.ltd
Mobil/Wechat/Whatsapp:+86 18038825870
Email:sales3@eejaxt.com
