Our this spindle is 9.0kw 12.0kw 24000rpm ISO30/BT30 automatic tool change,we offer OEM service.
This
type of spindle adopts ceramic bearing, which is wear-resistant and
heat-resistant, and its service life is several times longer than that
of steel ball bearing.We will choose FAG/SKF bearing.The spindle is
equipped with automatic tool changing device, including butterfly spring
and broach cylinder.
In order to realize the speed of tens of
thousands or even hundreds of thousands of revolutions per minute, it is
necessary to use a high-frequency conversion device to drive the
built-in high-speed motor of the spindle. The output frequency of the
inverter is as high as thousands or thousands of Hertz.
Specification:
| Service type | S6 | S1 | |
| Voltage | V±10% | 380/220 | 380/220 |
| Output Power | kw | 9 | 7.5 |
| Current | A | 17.1 | 14.9 |
| Max Frequency | Hz | 800 | 800 |
| Max Speed | rpm | 24000 | 24000 |
| Torque | Nm | 7.19 | 5.89 |
| Front Bearing | 7006 | ||
| Real Bearing | 7008 | ||
| Efficiency | 0.81 | ||
| Power factor | 0.83 | ||
| pole | 4 | ||
| Indulation classoltage | F | ||
| Cooling | Air cooling | ||
| Weight | KG | 28 | |
| Type of protection | IP | 54 |
Apllication:
By equipped with automatic replacement of the spindle, wood and wood-based board deep processing carving, carving, drilling, sawing, sanding, edge sealing, trimming and other processes concentrated on a machine tool to complete.Our this spindle can be used with ISO30 or BT30 toolholder.
Welcome to contact us!
Caroline,Ding
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Tel:+757 81239106-36
Email:sales3@eejaxt.com
