We are the NO.1 quality spindle in China.
First, our steel has been forged under high temperature. Generally, we will put the steel for 2 years of natural aging to release stress and heat energy. Secondly, the runout of our spindle rotor is less than 1um, so our spindle service life is generally more than 3 years. Thirdly the wiring of our spindle is copper plated with silver, and the insulation effect is very good. Finally,our spindle bearing is after multiple tests, we finally choose the imported bearing FAG/SKF.
Product description
This spindle motor up to 60000rpm for glasse.Optional with bearing made by GMG, FAG, SKF, China and ceramic bearings;Optional with two powers of 1.8 and 1.5kw; 1.2kw is made to customer demand; Automatically tool change;Long nose helps the spindles to be used more widely;Good looking appearance with quality anodizing of the cylinder area;
Temperature sensor is built in normally except that a customer doesn’t need it for low cost.
Specification
NO | Data | Model-62B |
1 | Motor power(kw) | 1.8/1.5/1.2 |
2 | Rate voltage(V) | 200(3~） |
3 | Max speed(RPM) | 60000 |
4 | Max frequency(HZ) | 1000 |
5 | Run-out at cone end(mm) | ≤0.001 |
6 | Torque(N.M) | 0.28/0.24/0.19 |
7 | Max current(A) | 6.5/5.0/4.3 |
8 | Tool change method | ATC |
9 | Tool holding | Φ3-Φ6 collet |
10 | Vibration value(mm/s) | ≤0.8 |
11 | Coolant | water |
12 | Net weight(Kg) | 3.97 |
13 | Tool pulling force(n) | ≥1200 |
14 | Encoder | No |
15 | Approach switch for tool realeasing | No |
16 | Dynamic balance grade | G1 |
17 | Tool releasing air pressure(Kgf/cm2) | 5.6-6.0 |
18 | Air sealing pressure at front end(Kgf/cm²) | ≈2.0 |
19 | Tool tightening air pressure | No |
20 | coolant pressure(Kgf/cm²) | ≥2.5 |
21 | Bearing lubrication method | Grease |
22 | Spindle Install method | Clamp |
Details image
Application
Package
Contact us
Guangdong Xingtuo Machinery Co., Ltd.
Address:
No. 5-6 of East Road 2, Lianhe Industry Zone of Luo Cun
Shishan Town of Nanhai District, Foshan City
Name: Caroline,Ding
Mobile/Whatsapp/Wechat: +86 15180038849
Tel:+86 757 81239106-36
Welcome to contact us.
