We are the NO.1 quality spindle in China.
First, our steel has been forged under high temperature. Generally, we will put the steel for 2 years of natural aging to release stress and heat energy. Secondly, the runout of our spindle rotor is less than 1um, so our spindle service life is generally more than 3 years. Thirdly the wiring of our spindle is copper plated with silver, and the insulation effect is very good. Finally,our spindle bearing is after multiple tests, we finally choose the imported bearing FAG/SKF.
This spindle motor up to 60000rpm for glasse.Optional with bearing made by GMG, FAG, SKF, China and ceramic bearings;Optional with two powers of 1.8 and 1.5kw; 1.2kw is made to customer demand; Automatically tool change;Long nose helps the spindles to be used more widely;Good looking appearance with quality anodizing of the cylinder area;
Temperature sensor is built in normally except that a customer doesn’t need it for low cost.
Run-out at cone end(mm)
Tool change method
Tool pulling force(n)
Approach switch for tool realeasing
Dynamic balance grade
Tool releasing air pressure(Kgf/cm2)
Air sealing pressure at front end(Kgf/cm²)
Tool tightening air pressure
Bearing lubrication method
Spindle Install method
Guangdong Xingtuo Machinery Co., Ltd.
No. 5-6 of East Road 2, Lianhe Industry Zone of Luo Cun
Shishan Town of Nanhai District, Foshan City
Mobile/Whatsapp/Wechat: +86 15180038849
Tel:+86 757 81239106-36
Welcome to contact us.