China 60000rpm Similar To Jager Dental Spindle Manufacturers and Factory

Product description

It has same quality as similar to Jager dental spindle motor,our this model with higher rotation speed for wider industrial application. And it can well mill the materials of Zirconia and Ceramic for false tooth.

Advantage

1. Very high rotation speed up to 60000rpm;

2. Specifically designed for false tooth engraving machining;

3. Meticulously designed cooling water route in the body make the motor and bearing temperature well controlled;

4. Reasonable and low cost;

5. Japan or Germany made bearings. China made bearings are optional for lower cost;

6. Compacted structure design;

7. Key parts including the central shaft are finely ground on Switzerland made Studder Grinding machines to be in the tolerance of +/-0.001mm. The concentricity and the tone area run-out of the parts can be made very well in 0.001mm tolerance;

8. Good looking appearances;

9. Supplied with specific VFD;

10. Temperature sensor is built in normally except that a customer doesn’t need it for low cost.

Structure

40V3尺寸图

Motor reference curve

40V3曲线图

Parameter

NO	Data	Model-40V3
1	Motor power(kw)	0.35
2	Rate voltage(V)	100(3~）
3	Max speed(RPM)	60000
4	Max frequency(HZ)	1000
5	Torque(N.M)	0.056
6	Max current(A)	6.5/5.0/4.3
7	Tooling change method	ATC
8	Tool conncection	Φ3-Φ4 collet
9	Vibration value(mm/s)	≤0.8
10	Cooling	Air coolant
11	Weight(Kg)	1.35
12	Tooling pulling force(n)	≥1000
13	Encoder	No
14	Approach switch	No
15	Balance level	G1
16	Tooling releasing air pressure(Kgf/cm2)	5.6-6.0
17	Air cutain presssure at front end(Kgf/cm²)	No
18	Tooling back air pressure	No
19	coolant pressure(Kgf/cm²)	≈2.0
20	Bearing lubrication method	Grease
21	Install method	Clamp
22	Cone at the end of the shaft pulsates(mm)	≤0.001