7.5kw 30000rpm cnc router ATC water cooling with imported bearing FAG/SKF/GMN spindle motor
1. Standard BT30 tool holder;
2. Sophisticated structure design, simple and compact configuration ,easy to take apart for bearing replacement and maintenance;
3. Well developed and matured product with option of bearings made in German, Japan and China like GMG, FAG, SKF, etc;
4. High rotation speed up to 30000rpm;
5. Most reliable performance and quality with the run-out 0.001mm and vibration value <0.8mm/s;
6. Automatically tool change with two set approach switches of sensing if the tool holder is tightened or not;
7. An encoder is optional for better monitoring of rotation speed and angle;
8. Good looking appearance with quality anodizing of the cylinder area;
9. Air sealing at the front end to stop tool lubricant, metal bits or other foreign materials entering in the spindle.
10. Temperature sensor is built in normally except that a customer doesn’t need it for low cost.
11. Optional with more powers of 7.5 and5.5Kw;
12. An option with flange for its installation onto a CNC.
Run-out at cone end(mm)
Tool change method
Tool pulling force(n)
Square wave TTL (choice)
Approach switch for tool realeasing
Dynamic balance grade
Tool releasing air pressure(Kgf/cm2)
Air sealing pressure at front end(Kgf/cm²)
Tool tightening air pressure
Bearing lubrication method
Spindle Install method
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Tel:+757 81239106-36MobileWechat:+86 18038825870 Whatsapp+008615180038849
If you are going to consult the information about 7.5kw cnc router spindle motor for metal milling form one of the leading China 7.5kw cnc router spindle motor for metal milling manufacturers, equipped with a productive factory, It is always at your service.