7.5kw/5.5kw 30000rpm metal cutting spindle motor.
High efficiency: the highest rotating speed is 30000 rpm, the power is 7.5kw/5.5 kw respectively(optional), High speed and fast machining, flexible tool change and stable performance. Installing encoder can realize quasi-stop.
High precision: taper hole runout is less than 0.001, reaching the same level abroad.
Long service life: The most advanced foreign ceramic ball bearings are adopted, and the vacuum dipping treatment of motor wire wrap is unique in the country.
High rigidity: (1) The main shaft has a compact structure and all parts are machined by grinding. (2) The bearing is preloaded with high-load spring, which makes the work vigorous.
Motor property curves
Motor power(kw) 7.5/5.5
Rate voltage(V) 380/220(3~）
Max speed(RPM) 30000
Max frequency(HZ) 1000
Max current(A) 14.5/10.5
Tooling change method ATC
Tool conncection BT30
Vibration value(mm/s) ≤0.8
Cooling Water coolant
Tooling pulling force(n) ≥2900
Encoder Square wave TTL (choice)
Approach switch PNP ON
Balance level G1
Tooling releasing air pressure(Kgf/cm2) 5.6-6.0
Air cutain presssure at front end(Kgf/cm²) ≈2.0
Tooling back air pressure 5.6-6.0
coolant pressure(Kgf/cm²) ≥2.5
Bearing lubrication method Grease
Install method Clamp
Cone at the end of the shaft pulsates(mm) ≤0.001
It is widely applicable to cutting, edging, polishing and polishing aluminum products, steel products, castings, wood, marble, various plastic plates, etc.
For more details,please contact us below
Foshan Nanhai Xingtuo Precise Mchinery Co,.Ltd
Mobil/Wechat/Whatsapp:+86 151 8003 8849
Email:email@example.comIf you are going to consult the information about 7.5kw metal aluminum alloy atc spindle form one of the leading China 7.5kw metal aluminum alloy atc spindle manufacturers, equipped with a productive factory, It is always at your service.