Product description
BT30 CNC Router Spindle For Heavier Cutting.1230-BT30 spindle diameter 120mm,7.5kw power,30000rpm with FAG/SKF bearing,This model is designed with an encoder (optional), the rotation speed and angle can be well monitored therefore tapping process can be conducted better.Two set of approach switches are installed in for sensing if the tool holder has been released or tightened. This helps better and safer control the automatically tool change.
Advantage
1. Standard BT30 tool holder;
2. Well developed and matured product with option of bearings made in German, Japan and China like GMG, FAG, SKF, etc;
3. High rotation speed up to 30000rpm;
4.BT30 Spindle For Heavier Cutting
Structure
Motor property curves
Parameter
NO | Data | Model-1230A |
1 | Motor power(kw) | 7.5/5.5 |
2 | Rate voltage(V) | 380/220(3~) |
3 | Max speed(RPM) | 30000 |
4 | Max frequency(HZ) | 1000 |
5 | Torque(N.M) | 5.73/4.78 |
6 | Max current(A) | 14.5/10.5 |
7 | Tooling change method | ATC |
8 | Tool conncection | BT30 |
9 | Vibration value(mm/s) | ≤0.8 |
10 | Cooling | Water coolant |
11 | Weight(Kg) | 26 |
12 | Tooling pulling force(n) | ≥2900 |
13 | Encoder | Square wave TTL (choice) |
14 | Approach switch | PNP ON |
15 | Balance level | G1 |
16 | Tooling releasing air pressure(Kgf/cm2) | 5.6-6.0 |
17 | Air cutain presssure at front end(Kgf/cm²) | ≈2.0 |
18 | Tooling back air pressure | 5.6-6.0 |
19 | coolant pressure(Kgf/cm²) | ≥2.5 |
20 | Bearing lubrication method | Grease |
21 | Install method | Clamp |
22 | Cone at the end of the shaft pulsates(mm) | ≤0.001 |
More details
Applications
For more details,please contact us below
Foshan Nanhai Xingtuo Precise Machinery Co,.Ltd
Mobil/Wechat/Whatsapp:+86 18038825870
Email:sales3@eejaxt.com