Product description
HSK spindle motor 3.7KW ATC 40000Rmp Water Cooling spindle motor for engraving machine
With more power and up to 40000rpm,this model has been well applied with CNC and CNC router in many industries like the mould/die making,3C,Aluminum extrusion profile processing,etc for milling,griding,cutting,sawing,drilling,tapping,etc on metal and non-metal materials.It can carry out heavier cutting due to the more power.
With quality HSK25E tool holder and more powerful tool pull force, it can conduct more accurate milling/drilling process than other 80 series spindles do and reach better tolerance of dimensions.
The power is linearly increased with the rotation speed and then keeps the torque constant in 0.9NM. Together with an encoder, the rotation speed and angle can be well monitored therefore tapping process can be conducted better.
Two set of approach switches are installed in for sensing if the tool holder has been released or tightened. This helps better and safer control the automatically tool change.
Advantage
1. HSK25E tool hoder and more powerfull tool pull force;
2. Standard ISO20 toolder with ER16 collet;
3. Sophisticated structure design, simple and compact configuration ,easy to take apart for bearing replacement and maintenance;
4. Well developed and matured product with option of bearings made in German, Japan and China like GMG, FAG, SKF, etc;
5. Very high rotation speed up to 40000rpm;
6. Most reliable performance and quality with the run-out 0.001mm and vibration value <0.8mm/s;
7. Automatically tool change with two set approach switches of sensing if the tool holder is tightened or not;
8. An encoder is optional for better monitoring of rotation speed and angle;
9. Good looking appearance with quality anodizing of the cylinder area;
10. Air sealing at the front end to stop tool lubricant, metal bits or other foreign materials entering in the spindle.
11. Optional with more power of 4, 3.7, 2.5Kw;
12. Temperature sensor is built in normally except that a customer doesn’t need it for low cost.
Specificiations
Parameters | |||||
Maximum Power | KW | 3.7 | Rated voltage | V/AC | 380(3~) |
Operating Speed | Rpm | 40000 | Max currency | A | 17 |
Max Frequency | Hz | 1333 | Maximum Torque | N·M | 1.19 |
Specification | |||||
Shaft Rotation Accuracy: | ≤0.001 | Tooling Releasing Air Pressure | Kgf/cm² | 5.6-6.0 | |
Tooling Exchange Method | ATC | Air curtain pressure at front end | Kgf/cm² | 2.5~3.0 | |
Tooling Pulling Force | 2800(max) | Tooling Back Air Pressure | Kgf/cm² | 5.6-6.0 | |
Tooling Connection | HSK25E Handle-ER16 | Cooling: | ─ | Water Cooling | |
Encoder: | Sine-Cosine 1VPP(Optional) | Coolant Pressure | Kgf/cm² | ≥2.5 | |
Approach Switch | PNP On | Bearing Lubrication Method | ─ | Grease | |
Balance Level | G1 | Tooling Instalation Method | ─ | Mechanical Holding | |
Vibration Value | mm/s | ≤0.8 | Weight | Kg | 7.65 |
Application:
![]() |
Contact With us
Want to locate XINGTUO ?
NO.1/2 LianHe Rood ,Luo Cun town,
Nanhai District, Foshan City, guangDong,china
Contact: Caroline,Ding
Tel: +86 757 81263106
Mobile/Whatsapp/Wechat: +86 18038825870
Email: sales3@eejaxt.com
EEJA SPINDLE MOTOR LIST
Metal cut Spindle motor | |||||||||||
Maximum Power | Operating Speed | Max Frequency | Tooling Exchange Method | Tooling Connection | Maximum Torque | Rated voltage | Max currency | Cooling Method | Weight | Remarks | |
1036A-ISO25 | 5.5KW | 36000Rmp | 1200Hz | ATC | ISO25-ER20 | 3.98 N.M | 380(3~)V/AC | 21 A | Water Cooling | 26KG | |
1036A-HSK32E | 5.5KW | 36000Rmp | 1200Hz | ATC | HSK32E-ER20 | 3.98 N.M | 380(3~)V/AC | 21 A | Water Cooling | 26KG | |
1230A-BT30 | 7.5KW | 30000Rmp | 1000Hz | ATC | BT30 | 5.73 N.M | 380(3~)V/AC | 25 A | Water Cooling | 26KG | |
1230A-HSK40E | 7.5KW | 30000Rmp | 1000Hz | ATC | HSK40E-ER25 | 5.73 N.M | 380(3~)V/AC | 25 A | Water Cooling | 26KG | |
Engraving CNC machine spindle motor | |||||||||||
Maximum Power | Operating Speed | Max Frequency | Tooling Exchange Method | Tooling Connection | Maximum Torque | Rated voltage | Max currency | Cooling Method | Weight | Remarks | |
0840A-ISO20 | 3.7 KW | 40000Rmp | 1333Hz | ATC | ISO20-ER16 | 1.19 N.M | 380(3~)V/AC | 17 A | Water Cooling | 7.8KG | |
0840A-HSK25E | 3.7 KW | 40000Rmp | 1333Hz | ATC | HSK25E | 1.19 N.M | 380(3~)V/AC | 17 A | Water Cooling | 7.8KG | |
80A2 | 3.7 KW | 40000Rmp | 1333Hz | ATC | φ10 CHUCK | 1.19 N.M | 380(3~)V/AC | 17 A | Water Cooling | 7.8KG | |
62F2 | 1.8KW/ 1.5K | 60000Rmp | 1000Hz | ATC | φ3-φ6 Chuck | 0.28 N.M | 200(3~)V/AC | 10 A | Water Cooling | 3.0 KG | Tool path smaller |
60B2 | 1.8KW/ 1.5K | 60000Rmp | 1000Hz | ATC | φ3-φ6 Chuck | 0.28 N.M | 200(3~)V/AC | 10 A | Water Cooling | 3.0 KG | |
60D1 | 1.8KW/1.5K | 60000Rmp | 1000Hz | ATC | ER11 | 0.28 N.M | 200(3~)V/AC | 10 A | Water Cooling | 3.0 KG |