Our spindle advantage:
1.Spindle runout within 0.001mm
2.12 months warranty
3.FAG/SKF imported bearing
4.3-8 years long life working spindle
Why choose us!
We have quality manufacturing/testing equipment like Studer S32 Swither made grinding machines and PLC controled testing station for all mechanical and electrical properties.
Over 12 years research and development and build up profound experience of motor spindles;
Keep optimizing structure, electrical properties, and convenient application in customers;
Key materials and components imported;
Steel:imported from Japan and Taiwan;(When we buy the steel back,we will stay them for at least 2 years.It will release the stress generated during processing and heat treatment.So our steel is stable.)
Bearing:SKF;FAG
University educated engineers and sales team;
Hands-on experienced engineers.
Specification
model | 0840A-ISO20 | Max speed(rpm) | 40000 | Max frequency (Hz) | 1333 |
Max voltage (V) | 380 | Rate current(A) | 7.5 | Rated power(Kw) | 3.5 |
Max torque Nm | 1.27 | Max current(A) | 14 | Max power(Kw) | 4.0 |
Technical Data Sheet | |||||
item | Name | value | note | ||
1 | Bearing lubrication | Grease | |||
2 | Standard tool holder | ISO20shank-ER16 | |||
3 | Number of broach | More than three million | |||
4 | spindle discharge pressure | 0.5-0.6 | MPa | ||
5 | Spindle pinch pressure | 0.5-0.6 | MPa | ||
6 | Air pressure | 0.2-0.25 | MPa | ||
7 | Spindle blowing air flow | 30±10 | L/min | ||
8 | Spindle gas seal pressure | 0.2-0.25 | MPa | ||
9 | Spindle Gas sealed gas flow | 50±10 | L/min | ||
10 | Cooling water pressure | 0.25-0.4 | MPa | ||
11 | Cooling water flow | 2-3 | L/min | ||
12 | Cooling water temperature | 24-28 | ℃ | ||
13 | Radial stiffness of spindle | ≥80 | N/μm | ||
14 | Axial stiffness of spindle | ≥70 | N/μm | ||
15 | Full runout of the inner cone of the spindle end | ≤0.001 | mm | ||
16 | Static bias of spindle end | ≤0.002 | 75mm | ||
17 | Spindle Vibration value | ≤0.8 | mm/s | ||
18 | Spindle assembly diameter | Φ80 0/-0.019 | mm | ||
19 | Noise value | ≤72 | dBA | ||
20 | Tool holder Tightening force | 500(1±10%) | N | ||
21 | Insulation resistance of motor | ≥500 | H级 | ||
22 | Pressure test of motor winding | 1500V/min |
Applications
Caroline,Ding
Mobile/whatsapp/wechat:0086 18038825870
Email:sales3@eejaxt.com