Product description
Our this model Metal Milling HTC Spindle Motor is used for the metal and PCB milling,hand tool change electrict spindle motor.
The power is 1.8kw/1.5kw/1.2kw, 60000rpm 200V 1000HZ 6.5A/5.0A/4.3A high speed electric spindle motor.
Our 62D-ER11 metal milling HTC spindle motor advantag:
1.Imported bearing; bearing with dust cover, safer
2. Water cooled motor, with large carving force, high precision and long service life
3. Low noise, suitable for working in a not very noisy environment
4. Grinding process can improve motor concentricity and prolong service life
Parameter
NO | Data | Model-60D2 |
1 | Motor power(kw) | 1.8/1.5/1.2 |
2 | Rate voltage(V) | 200(3~) |
3 | Max speed(RPM) | 60000 |
4 | Max frequency(HZ) | 1000 |
5 | Run-out at cone end(mm) | ≤0.001 |
6 | Torque(N.M) | 0.28/0.24/0.19 |
7 | Max current(A) | 6.5/5.0/4.3 |
8 | Tool change method | HTC |
9 | Tool holding | ER11 collet |
10 | Vibration value(mm/s) | ≤0.8 |
11 | Coolant | Water |
12 | Net weight(Kg) | 3.0 |
13 | Tool pulling force(n) | No |
14 | Encoder | No |
15 | Approach switch for tool realeasing | NO |
16 | Dynamic balance grade | G1 |
17 | Tool releasing air pressure(Kgf/cm2) | 5.6-6.0 |
18 | Air sealing pressure at front end(Kgf/cm²) | ≈2.0 |
19 | Tool tightening air pressure | No |
20 | coolant pressure(Kgf/cm²) | ≥2.5 |
21 | Bearing lubrication method | Grease |
22 | Spindle Install method | Clamp |
Applications
![]() | ![]() |
Spindle properties
Certifications
Contact us
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Address:NO.2/1,Lianhe,Road,Luocun,Nanhai,Foshan
Name:Caroline Ding
Tel:+757 81239106-36Mobile:+86 15180038849 Wechat:272533028Email:sales5@eejaxt.com
Website: http://xingtuo.en.alibaba.com http://www.eejaxt.com