Product description
Our spindle 62V-ISO10 Rated power is1.5KW/1.8KW, rated speed is as high as 60000pm,The machining accuracy of internal diameter jump < 1μ is higher and the weight is only 3kg.
Advantages of PCB Processing spindle: 1)ESD protection function applied in electronic industry;2)High quiet design to keep customers away from industrial noise;3)Lightweight, small size, more portable machine tools;4)The shaft has a maximum of 60000rpm, allowing more options for cutting efficiency.
5)Separating the high-frequency spindle by milling and sawing can greatly reduce the mechanical load, thus significantly reducing the defect rate.
Our spindle advantage:
1.100% REFUND IF SPINDLE MOTOR NOT WORK
2.FREE Maintance training
3.FREE repair technology training for partners
4.Enough stock support
5.Free customized for special design
Specification
NO | Data | Model-62V |
1 | Motor power(kw) | 1.8 |
2 | Rate voltage(V) | 200(3~） |
3 | Max speed(RPM) | 60000 |
4 | Max frequency(HZ) | 1000 |
5 | Run-out at cone end(mm) | ≤0.001 |
6 | Torque(N.M) | 0.28/0.24/0.19 |
7 | Max current(A) | 6.5/5.0/4.3 |
8 | Tool change method | ATC |
9 | Tool holding | ISO10-ER11 |
10 | Vibration value(mm/s) | ≤0.8 |
11 | Coolant | water |
12 | Net weight(Kg) | 3.9 |
13 | Tool pulling force(n) | ≥700 |
14 | Encoder | No |
15 | Approach switch for tool realeasing | NO |
16 | Dynamic balance grade | G1 |
17 | Tool releasing air pressure(Kgf/cm2) | 5.6-6.0 |
18 | Air sealing pressure at front end(Kgf/cm²) | ≈2.0 |
19 | Tool tightening air pressure | NO |
20 | coolant pressure(Kgf/cm²) | ≥2.5 |
21 | Bearing lubrication method | Grease |
22 | Spindle Install method | Clamp |
Detail show
Applications
Contact us
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd established in 2006,we specialize in designing and manufacturing spindle motor and motor parts.
Caroline,Ding(丁广梅)
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Tel:+757 81239106-36 MobileWechat:+86 18038825870 Whatsapp+008615180038849
Address:NO.2/1,Lianhe,Road,
Website: http://www.e