Our spindle 62D Rated power is 2.5KW, rated speed is as high as 60000pm.
Advantages of PCB Processing spindle: 1)ESD protection function applied in electronic industry;2)High quiet design to keep customers away from industrial noise;3)Lightweight, small size, more portable machine tools;4)The shaft has a maximum of 60000rpm, allowing more options for cutting efficiency.
5)Separating the high-frequency spindle by milling and sawing can greatly reduce the mechanical load, thus significantly reducing the defect rate.
Motor power(kw) 1.8/1.5/1.2
Rate voltage(V) 200(3~）
Max speed(RPM) 60000
Max frequency(HZ) 1000
Max current(A) 6.5/5.0/4.3
Tooling change method HTC
Tool conncection ER11 collet
Vibration value(mm/s) ≤0.8
Cooling Water coolant
Tooling pulling force(n) No
Approach switch No
Balance level G1
Tooling releasing air pressure(Kgf/cm2) No
Air cutain presssure at front end(Kgf/cm²) ≈2.0
Tooling back air pressure No
coolant pressure(Kgf/cm²) ≥2.5
Bearing lubrication method Grease
Install method Clamp
Cone at the end of the shaft pulsates(mm) ≤0.001
For more details,please contact us below
Foshan Nanhai Xingtuo Precise Mchinery Co,.Ltd
Mobil/Wechat/Whatsapp:+86 151 8003 8849
If you are going to consult the information about 60000rpm pcb drilling cnc spindle form one of the leading China 60000rpm pcb drilling cnc spindle manufacturers, equipped with a productive factory, It is always at your service.