Ceramic Bearing 60000rpm ISO10 Spindle Motor

This product USES high-precision angular contact ball bearing, built-in three-phase variable frequency asynchronous high-efficiency motor, controlled by the frequency converter continuously variable speed, the highest speed up to 60000rpm, can achieve higher speed, accuracy and running stability...
Chat Now

Product Details

This product USES high-precision angular contact ceramic ball bearing, built-in three-phase variable frequency asynchronous high-efficiency motor, controlled by the frequency converter continuously variable speed, the highest speed up to 60000rpm, can achieve higher speed, accuracy and running stability milling processing.

The performance characteristics of:

1. High precision: the rotary precision of the tool holder core is less than 0.003mm.

2, high efficiency: the spindle speed is higher, the processing feed speed is increased accordingly, so as to achieve higher efficiency.

3. 4 model 3mm 3.175mm 4mm 6mm taper hole collet, simple structure and economical application.Tool holder diameter range 1.0-6mm.

4, Personalized customization: with good compatibility, can be widely used in various industries of various materials carving, milling processing.Can also be customized according to customer needs.

5. Circulating water cooling: add cooling circulation channel in the body to cool the motor and front and rear bearings.Coolant flows through the reasonable arrangement in the spindle body circulation cooling channel take away the heat generated by the high-speed spindle rotates, reach thermal equilibrium state, make the spindle temperature constant within a certain range, to ensure the safe, stable performance, the spindle operation good cooling effect, high efficiency, temperature rise is small, the spindle thermal elongation is small, ensure the service life of the spindle and the spindle axis precision.


Specification:

Model62V2-ISO10Max current6.5A
Voltage33-200VFrequency(hz)167-1000
Speed10000-60000RPMPower(_kw)1.8KW
Dynamic deflection of spindle end(um)≤8.0(50mm)Static deflection of shaft end(um)≤2.0
Vibration(mm/s)≤0.8Tool holderISO10-ER11


图片


Technical requirements:
1. The single locking torque of the clamping screw is 3-5nm. When clamping the spindle, please use the torque wrench.
First use 2Nm to screw,then 3-5Nm.
2. Before running the spindle, check whether the exhaust in the air seal is normal before starting the spindle.


Spindle details:

ISO10 SPINDLE2.jpg

ISO10-ER11 COLLET


ISO10 SPINDLE3.jpg

ISO10-T11 COLLET


SPINDLE.jpg

SPINDLES

Application:

application3.jpg

PCB application


application2.jpg

Dental application


application4.jpg

Glass application

Welcome to contatc us!


Eliza,Fan
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Tel:+757 81239106-36

Mobile/Whatsapp/Wechat:0086 13415719773

Email:sales3@eejaxt.com

Inquiry