High-speed tapping, drilling and milling spindle is a high-frequency spindle with a spindle diameter of 62mm. It is often used for drilling, tapping and milling of materials with high rigidity. Its rated power is 1.8KW/1.5KW, its rated speed is as high as 60000pm, its internal diameter jump < 1 μ has high machining accuracy and its weight is only 3.9kg.
Motor power(kw): 1.8/1.5/1.2
Rate voltage(V): 200(3~）
Max speed(RPM): 60000
Max current(A): 6.5/5.0/4.3
Tooling change method: ATC
Tool conncection: Φ3-Φ6 collet
Vibration value(mm/s): ≤0.8
Cooling: Water coolant
Tooling pulling force(n): ≥1200
Approach switch: No
Balance level: G1
Tooling releasing air pressure(Kgf/cm2): 5.6-6.0
Air cutain presssure at front end(Kgf/cm²): ≈2.0
Tooling back air pressure: No
coolant pressure(Kgf/cm²): ≥2.5
Bearing lubrication method: Grease
Install method: Clamp
Cone at the end of the shaft pulsates(mm): ≤0.001
Our spindle advantage
62B model motorized spindle "is a mature product with extremely high precision, stability and running stability. Constant research and development and quality control can ensure the performance required by high-precision chip cutting tasks. The sealed air inside the spindle is used to prevent dust, chips and liquid from invading, thus significantly prolonging the service life. In addition, it has the characteristics of high rigidity, little running vibration and full-life lubrication.
For more details,please contact us below
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.