As a professional spindle manufacturer with 12+years experience, aimed to provide high quality and high precision water-cooled and air-cooled spindle motor, all adopt imported bearings, like FAG. EF, GMN.
12kw 24000rpm HSK63F tool holder air cooling woodworking spindle motor
1. Long nose so that dust sucking system can be installed on;
2. High accurate HSK63F tool holder and bigger tool pulling force;
3. Imported bearings with long life and sophisticated/matured design;
4. Automatically tool change with two set approach switches for sensing if the tool holder has been tightened or not.
5. Small vibration; high power, large torque, small deviation and so on;
6. Similar to the most successfully designed model in the world and widely used in many industries, one of the best sales;
7. Optional with cooling methods of compressed air and fan;
8. An encoder is optional for better monitoring of rotation speed and angle;
Run-out at cone end(mm)
Tool change method
Tool pulling force(n)
Square wave TTL (choice)
Approach switch for tool realeasing
Dynamic balance grade
Tool releasing air pressure(Kgf/cm2)
Air sealing pressure at front end(Kgf/cm²)
Tool tightening air pressure
Bearing lubrication method
Spindle Install method
Caroline,Ding(丁广梅)Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Tel:+757 81239106-36Mobile Wechat:+86 18038825870 Whatsapp+008615180038849
If you are going to consult the information about 12kw wood router atc spindle motor form one of the leading China 12kw wood router atc spindle motor manufacturers, equipped with a productive factory, It is always at your service.