Our spindle WP145B-ISO30 is with FAG/SKF imported bearing,9 kw 24000rpm.The characteristics of the precision machining spindle motor automatic tool change air-cooled spindle with high speed and low noise, strong power, high accuracy, long life, double-layer seal and gas seal structure, excellent dust effectare.which are suitable for machining extremely wood, aluminum ect.
Correct operation of a spindle
As a part of an equipment, the structure holding the spindle must be strong and rigid enough to support the spindle’s weight and withstand the cutting force in machining.
The spindles described in this instruction is designed and made for drilling and milling the materials of wood and plastic as well as fiber reinforced plastic.
These spindles are designed to run in the S1 operation system. Hereafter details of their different technical specification will be introduced. To prevent the damage to the precise bearing, a reverse direction force bearing mechanical part is installed to bear the axial force applied when a tool is exchanged.
Tooling change method
Tooling pulling force(n)
Square wave TTL (choice)
Tooling releasing air pressure(Kgf/cm2)
Air cutain presssure at front end(Kgf/cm²)
Tooling back air pressure
Bearing lubrication method
T type groove
Cone at the end of the shaft pulsates(mm)
This spindle is fitted for wood aluminum processing.
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
NO.1/2 LianHe Rood ,Luo Cun town,
Nanhai District, Foshan City, guangDong,china