Product introduction:
145B-ISO30 9.0KW 12.0KW air-cooled automatic tool change spindle
is a high-end woodworking company designed to develop high-power
electric spindle bearings imported from Germany, high-precision
bearings, high precision, long life. The electric spindle fan cooling
with Road gas seal structure, automatic tool changer with ISO30 shank,
fast automatic tool change and improve the efficiency of the automated
processing.
Specification:
| Parameters | |||||
| Motor power | KW | 7.5/9.0 | Rate voltage | V/AC | 380（3~） |
| Max speed | Rpm | 24000 | Max current | A | 20 |
| Max frequency | Hz | 800 | Torque | N·M | 7.16 |
| Specification | |||||
| Cone at the end of the shaft pulsates | mm | ≤0.001 | Tooling releasing air pressure | Kgf/cm² | 5.6-6.0 |
| Tooling change method | ─ | ATC | Air cutain presssure at front end | Kgf/cm² | 2.5～3.0 |
| Tooling pulling force | N | ≥2900 | Tooling back air pressure | Kgf/cm² | ─ |
| Tooling connection | ─ | ISO30 TOOL HOLDER | Cooling | ─ | AIR COOLING |
| Encoder | ─ | Sine-Cosine 1VPP(Optional) | coolant pressure | Kgf/cm² | ─ |
| Approach switch | ─ | PNP ON | Bearing lubrication method | ─ | Grease |
| Balance level | ─ | G1 | Install method | ─ | T type groove |
| Vibration Value | mm/s | ≤0.8 | Weight | Kg | 29.6 |
Welcome to contact us!
Caroline,Ding
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.
Tel:+757 81239106-36
Mobile/Whatsapp/Wechat:+8618038825870
Address:NO.2/1,Lianhe,Road,Luocun,Nanhai,Foshan
Website:http://www.eejaxt.com
