This is a very popular model similar to the most sophisticated design in the world. It is designed for the industries of Wood and Aluminum extrusion profile cutting and should be the most widely used spindles in its industries.
The body is made of Aluminum extrusion profile with good heat treatment strength and can radiate heat well via many outside fins, which effectively reduce the heat of the motor. Especially the German made axial flow fan is used at the end of its body and greatly improves the heat radiation.
1. Imported bearings with long life.
2. Manual tool change for lower cost;
3. Small vibration; high power, large torque, small deviation and so on;
4. Similar to the most successfully designed model in the world and widely used in many industries, one of the best sales;
5. Optional with cooling methods of compressed air and fan;
6. An encoder is optional for better monitoring of rotation speed and angle;
7. Short nose therefore no dust sucking system can be installed;
Run-out at cone end(mm)
Tool change method
Tool pulling force(n)
Square wave TTL (choice)
Approach switch for tool realeasing
Dynamic balance grade
Tool releasing air pressure(Kgf/cm2)
Air sealing pressure at front end(Kgf/cm²)
Tool tightening air pressure
Bearing lubrication method
Run-out at cone aera(mm)
For more details,please contact us below
Foshan Nanhai Xingtuo Precise Machinery Co., Ltd.